Inspection Of Car Refrigerator With Compressor

Every time we make a choice, it is a great affirmation, and every time we meet, we are well prepared, and we are serious about making car portable fridge freezer manufacturer’s compressor car refrigerators. Probably because of this seriousness, we can continue to expand the domestic and international markets without much publicity!

Do you know what kind of test the ice maker car refrigerator has gone through in order to get the ticket to meet you? It's not so much!

Before leaving the factory, the ice maker car refrigerator has undergone ten major tests such as high and low temperature and refrigerant leakage. Only if the test is qualified, will you get an admission ticket to meet you. Take a look at what are the top ten tests?

◆Incoming inspection
Market competition is cruel, but Icesmith never competes with inferior products. The selection of materials is one of the most important manifestations. Only after our strict quality inspection and qualified, we will finally choose.

◆Tightness test
Is it OK to test the airtightness of the refrigerator?

◆Detection of leaking refrigerant
Is there any leakage of refrigerant in the test refrigerator?

◆Vibration test
In the power-on state, the refrigerator is subjected to 220 vibration tests for 1 minute to see if the refrigerator is shock-proof and anti-shake?

◆Voltage test
Test whether the power adapter is high voltage resistant?

◆High and low-temperature test
Test for 4 hours at a high temperature of 60°C and a low temperature of -30°C for 4 hours to see if the sample is deformed, peeled off, or discolored?

◆Battery protection function test
Test whether the refrigerator's low voltage protection works normally? The refrigerator has a three-level battery protection setting, which automatically cuts off the power at low voltage to protect the car battery.

◆Box drop test
At a height of 80cm, test one corner, three edges, and six sides to see if the camping car freezer

and packaging is damaged, and whether the parts fall off?

◆Salt spray test
Put 5% saltwater in the box and set the temperature to 26℃. Test the stainless steel parts and aluminum inner tank for 108 hours to see if there is any corrosion on the surface of the parts.

◆Full inspection
It is also the final 2-hour temperature test to see if the cooling effect is OK?
Why is the quality inspection so strict? Because I just want to meet you in a better state!