Points For Attention In The Use Of Car Refrigerators

    At present, there are two common car refrigerators on the market. One is a semiconductor car refrigerator, the principle is to rely on electronic chips to cool, the cooling temperature range is 5 to 65 degrees. The advantages of this kind of refrigerator are that it can cool and heat, the volume is small, the cost is relatively low, there is neither vibration nor noise when working, and the service life is relatively long. The other is the compressor car refrigerator. The compressor is a traditional technology, and the refrigeration temperature is low, which is 18 to 10 degrees below zero. High refrigeration efficiency, can refrigerate, keep fresh, and have a large volume. Compressor refrigerators only have a cooling function, which can be stably and effectively refrigerated. In many high-end cars and standard cars, compressor refrigerators are used.

    When using the car refrigerator in the car, do not let water enter the air inlet of the refrigerator, while the heat source is flowing. When switching from the heating function to the cooling function, turn off the power first, and then start it after five minutes. Do not place magnetic objects in the car refrigerator, otherwise the refrigerator will fail. Because the car refrigerator consumes a lot of power, you should also remember to cut off the power supply of the refrigerator when you turn off the engine, so as not to drain the battery power. It is best to configure a multi-function socket in the car to ensure that the car refrigerator, car lights, hands-free equipment, and other electronic devices can be used at the same time.

    Finally, during the use of the car refrigerator, you should pay attention to the cigarette lighter, keep away from the heat source, and be careful not to let water enter the air inlet. Magnetic objects cannot be placed in the car refrigerator, which will affect the cooling chip.